Portable 1DLP Projector
Excellent Portability and Superb Basic Performance in a Compact Body The Panasonic PT-LX300 Series offers bright, clear images by enhancing basic performance. Easy operation and excellent mobility make them ideal for classrooms, board rooms, and other portable uses.
| Power supply | 100-240 V AC, 50/60 Hz | |
| Power consumption | 218 W (0.5 W when STANDBY MODE set to ECO,*1 6.0 W when STANDBY MODE set to NORMAL.*2) | |
| DLPTM chip | Panel size | 14 mm (0.55 in) (4:3 aspect ratio) |
| Display method | DLP™ chip x 1, DLP™ projection system | |
| Pixels | 786,432 (1,024 x 768) pixels | |
| Lens | 1.1x Manual zoom (1.95-2.15:1 throw ratio), manual focus, F 2.41-2.53, f=21.8-24 mm | |
| Lamp | 190 W UHM lamp | |
| Lamp replacement cycle(Normal / Eco1, Eco2 / AUTO) | 4,500 / 6,000 / 10,000 hours*3 | |
| Screen size (diagonal) | 0.76-7.62 m (30-300 in), 4:3 aspect ratio | |
| Brightness*4 | 3,000 lm | |
| Center-to-corner uniformity*4 | 80 % | |
| Contrast*4 | 4,000:1 (full on/full off, During RGB signal input, Color mode: Dynamic, Lamp power: Normal) | |
| Resolution | 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.) | |
| Scanning frequency | HDMI | fH: 15-91.1 kHz, fV: 24-85.1 Hz, dot clock: 25-162 MHz |
| RGB (analog) | fH: 15-91.1 kHz, fV: 24-85.1 Hz, dot clock: 162 MHz or lower | |
| YPBPR (YCBCR) | fH: 15.75 kHz, fV: 60 Hz [480i (525i)] fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p] fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p] fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p] |
|
| Video | fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
|
| Optical axis shift | 10:-1.5 | |
| Keystone correction range | Vertical: ±40° (manual) | |
| Installation | Ceiling/floor, front/rear | |
| Terminals | HDMI IN | HDMI 19-pin x 1 (Deep color, compatible with HDCP), audio signal: linear PCM (sampling frequency: 48 kHz, 44.1 kHz, 32 kHz) |
| COMPUTER IN | D-sub HD 15-pin (female) x 1 [RGB/YPB(CB)/PR(CR) x 1] | |
| MONITOR OUT | D-sub HD 15-pin (female) x 1 | |
| VIDEO IN | Pin jack x 1 | |
| SERIAL IN | Mini DIN 3-pin (female) x 1 for external control (RS-232C compliant) | |
| AUDIO IN | M3 x 1 (L-R x 1) | |
| AUDIO OUT | M3 x 1 (L-R x 1) for output (variable) | |
| Built-in speaker | 4 x 2 cm oval shape x 1, output power 2 W (monaural) | |
| Cabinet materials | Molded plastic (PC) | |
| Dimensions (W x H x D) | 286 x 100.6*5 x 192 mm (11-1/4 x 3-31/32 x 7-9/16 in) | |
| Weight | Approximately 2.3 kg (5.1 lbs)*6 | |
| Operation noise*⁴ | 34 dB (Lamp power: Normal), 29 dB (Lamp power: Eco) | |
| Operating temperature | 5-40°C [41-104°F] (Less than 750 m [2,500 ft] above sea level), 5-35°C [41-95°F] (between 750 and 1,500 m [2,500 ft and 5,000 ft] above sea level), 5-30°C [41-86°F] (between 1,500 and 3,000 m [5,000 ft and 10,000 ft] above sea level) |
|
| Operating humidity | 20-80 % (no condensation) | |
| Supplied accessories | Power cord (1.8 m*7) x 1*8, wireless remote control unit x 1, lithium coin cell battery x 1, computer cable (1.8 m) x 1 |
|
| NOTE | * Product numbers vary depending on the market. The general guideline is as follows: The product number in the Americas and Taiwan is PT-LX300U and PT-LX270U. The product number in Europe (except the UK) and CIS is PT-LX300E and PT-LX270E. The product number in the UK, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-LX300EA and PT-LX270EA. *1 When [VGA Out (Standby)] / [In Standby Mode (Audio)] are all set to [Off]. *2 When [VGA Out (Standby)] / [In Standby Mode (Audio)] are all set to [On]. *3 This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. The usage environment affects the duration of the lamp. *4 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *5 With legs at shortest position. *6 The above values are averages. Actual values may be different according to the product. *7 Power cord (2 m) for the PT-LX300U/LX270U. *8 Power code (x2) for the PT-LX300EA/LX270EA. NOTES ON USE 1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping sound, or fail to illuminate, due to impact or extended use. 2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
|
|