Product Categories

Product Search

Gear Syn PGS

    Gear Syn PGS

    Synthetic Gear & Bearing Oil
    GEAR SYN PGS Series Gear Lubricants are high performance products developed in cooperation with major gear manufacturers, designed primarily for industrial worm gear application, but may also be considered as a general-purpose gear lubricant for critical applications. 
    These fluids are Polyalkylene glycol (PAG) synthetic based fluids that provide excellent thermal and oxidative stability, load carrying ability, and sludge-free performance over an extremely wide temperature range. In addition, these fluids have low foaming tendencies and good rust protection, even in salt-water environs.
     
    APPLICATIONS
    • Worm gear applications.
    • General-purpose Gear Lubricant.
    • Other Applications requiring high temperature resistant lubricant
    PACKAGING
    • 18 Liters pail, 209 Liters drums
    COMPATIBILITY
    Seals: GEAR SYN PGS may be used with all common seal materials except leather. 

    Paints: High quality epoxy or red lead based paints should be used, as the synthetic basestock tends to soften certain paints. 

    Flush: When changing over from a conventional mineral oil or grease, care should be taken to minimize contamination by decomposition products from the previous lubricant. Flush with a light mineral oil followed by a light petroleum solvent rinse and air dry.

     

     

     
     
    PRODUCT TYPICALS
    CHARACTERISTICS GRADE
    PGS150 PGS220 PGS320 PGS460
    Viscosity, cSt      
    @ 40°C 150 220 320 400
    @ 100°C 24.5 35.8 54.6 80.0
    Viscosity Index 200 205 238 279
    Specific Gravity, 15°C, g/cm³ 1.007 1.034 1.069 1.044
    Pour Point (max.), °C -35 -32 -30 -32
    Flash Point (min.), °C 277 293 275 297
    Rust Protection (ASTM D-665B) Pass Pass Pass Pass
    FZG Gear Test, Final Pass Stage 11 12 12 12