Product Categories

Product Search

Jenteram Syn AE

    Jenteram Syn AE

    Advanced Lubricant for Gas Turbine Engines
    JENTERAM SYN AE is a lubricating oil with a viscosity of 5 cSt at 100°C. It is based on polyol esters with high thermal stability, fortified with technically proven anti-oxidant, anti-wear and anti-corrosion additives.
    JENTERAM SYN AE has been developed for the increased demands of the latest technological development in gas turbine engines. It has demonstrated an excellent thermal and oxidation stability, with no coke or deposit formation in the hot parts of the gas turbine such as the high pressure turbine bearing, scavenge or vent lines.
     
    APPLICATIONS JENTERAM SYN AE is designed for use in military and civil aircraft gas turbine engines and in stationary industrial applications. 

    JENTERAM SYN AE is highly recommended and validated for use on the following industrial gas turbines :
    • Rolls-Royce - All marks of RB 211 and AVON, Olympus, Tyne, Spey for industrial & marine applications.
    • Allison/Rolls Royce 501 K (all models)
    • General Electric - LM 500, LM1600, LM2500 & LM2500+, LM5000, LM6000, LMS 100
    • Turbomeca – Makila TI
    • All SOLAR gas turbines (meets SOLAR ES 9-224 Class III)
    SPECIFICATIONS
    • MIL-PRF-23699 F Class STD
    PACKAGING
    • 208 Liters Drum

     

    PRODUCT TYPICALS
    CHARACTERISTICS UNIT TYPICAL RESULTS LIMIT * TEST METHOD
    Kinematic viscosity at mm 2/s (cSt)     ASTM D 445
    100°C   5.12 4.90 - 5.40  
    40°C   25.6 min. 23.0  
    -40°C   9468 max. 13000  
    Low temperature stability %     FTM-S-791-3458
    72 h at - 40°C   - 0.7 max. ± 6  
    Flash point, COC °C 270 min. 246 ASTM D 92
    Pour point °C - 57 max -54 ASTM D 97
    Acid number mgKOH/g 0.16 max. 1.00 SAE ARP 5088
    Evaporation loss       ASTM D 972
    6 h 30 min at 204 °C        
    Mass fraction % 3.4 max. 10.0  
    Foaming characteristics       ASTM D 892
    Foam volume ml      
    Sequence I at 24 °C        
    5 minutes aeration   10 max. 25  
    1 minute settling   0 0  
    Sequence II at 93.5 °C        
    5 minutes aeration   5 max. 25  
    1 minute settling   0 0  
    Sequence III at 24 °C after 93.5 °C        
    5 minutes aeration   0 max. 25  
    1 minute settling   0 0  

    * MIL-PRF-23699 F Class STD