Product Categories

Product Search

Pressol Syn CH

    • Print

    Pressol Syn CH

    Synthetic Gas Compressor Lubricant
    PRESSOL SYN CH SERIES is a synthetic-based lubricant formulated for use in hyper-compressors and natural gas reinjection applications.
    It features higher film strength than traditional lubricants, protects against corrosion, is fully compatible with most compressor components, and minimizes the effect of H2S concentrations in sour gas.
     
    PRESSOL SYN CH SERIES contains no animal fats or saponifiable products that interfere with well-bore treatment products.
     
    APPLICATIONS
    • Inntended for the cylinder lubrication of hypercompressors and in natural gas re-injection applications.
    • May also be used as a cylinder lubricant for reciprocating compressors processing natural gas, carbon dioxide and other gases that require chemical resistance in an ISO 200 viscosity grade.
    PACKAGING
    • 18 Kgs pails and 180 Kgs drums
    COMPATIBILITY
    • Recommended: Acetone, Alcohol, Asbestos, Butyl Dioxtol, Chlorinated Solvents, Glycol Ether, Neoprene, Epoxy Paint, Silicone Rubber, Toluene, Torlon (AMOCO), Vespal (DuPont), and Viton (DuPont).
    • Questionable: Ethylene Glycol, Triethanolamine, and Water.
    • Not Recommended: Gasoline, Glycerol, Heptane, Kerosene, Leather, Methanol, and Oilbased paint.
     
    PRODUCT TYPICALS
    CHARACTERISTICS GRADE
    100 150 220
    Viscosity, cSt      
    @40°C 82.6 143 198
    @100°C 16.4 26.4 34.8
    Viscosity 215 228 228
    Pour Point, °C -45 -42 -40
    Flash Point, COC, °C 280 255 295
    Fire Point, COC, °C 320 275 320
    Specific Gravity, 60°F 1.045 1.052 1.067
    Density, lbs/gal, °F 8.7 8.75 8.89
    Copper Strip Corrosion, ASTM 320 275 320
    Foam Test, Seq 1, ml initial, ml final 0/0 0/0 0/0
    Total Acid Number, mg KOH/g, 0.3 0.00 0.01
    Water content, % 0.05 0.01 0.05